top of page

Vintage Dolls Houses

Public·8 members
Christ Tresor Kouadio
Christ Tresor Kouadio

Livesuit Pack V1

Livesuit Pack V1 How to Flash Firmware on Allwinner Devices

If you have an Android device that is powered by an Allwinner chipset, you might want to flash a new firmware on it to update its system or fix some issues. However, you cannot use the usual methods of flashing firmware, such as using a recovery mode or a flash tool. You need a special tool that is designed for Allwinner devices, and that tool is called LiveSuit.

LiveSuit is a flash tool that allows you to install firmware on any device based on the Allwinner chipset. This tool is pretty simple to use, as it comes with a firmware upgrade wizard that will guide you through the process. It supports numerous Allwinner chipsets, such as Allwinner A10, A13, A20, and A31. You can download the latest version of LiveSuit from various sources online, but one of the most popular ones is Livesuit Pack V1

Download Zip:

Livesuit Pack V1 is a compressed file that contains the LiveSuit tool for Windows, along with some drivers and firmware files. You can use this pack to flash firmware on your Allwinner device easily and quickly. In this article, we will show you how to use Livesuit Pack V1 to flash firmware on your Allwinner device.

How to Use Livesuit Pack V1 to Flash Firmware on Allwinner Device

Before you start, make sure you have the following things ready:

  • A Windows PC

  • A USB cable

  • An Allwinner device with at least 50% battery charge

  • A compatible firmware file for your device (you can find some firmware files in the Livesuit Pack V1 file, or you can download them from other sources)

  • A backup of your data (flashing firmware will erase everything on your device)

Once you have everything ready, follow these steps:

  • Download Livesuit Pack V1 from [this link] and extract it to a folder on your PC.

  • Open the extracted folder and run LiveSuit.exe as administrator.

  • Click on the Select Img button and browse to the firmware file that you want to flash.

  • Click on Yes when prompted to format your device.

  • Turn off your device and connect it to your PC via USB cable.

  • Press and hold the Volume Up or Volume Down button (depending on your device model) and then press the Power button for a few seconds until you see a prompt on your PC asking you to install the drivers.

  • Click on Yes and follow the instructions to install the drivers. If you encounter any problems, you can manually install the drivers from the Driver folder in the Livesuit Pack V1 file.

  • Once the drivers are installed, you will see a progress bar on your PC showing the flashing process.

  • Wait until the flashing process is completed and then disconnect your device from your PC.

  • Turn on your device and enjoy the new firmware.

Congratulations, you have successfully flashed firmware on your Allwinner device using Livesuit Pack V1 If you have any questions or problems, feel free to leave a comment below.


Welcome to the group! You can connect with other members, ge...


Group Page: Groups_SingleGroup
bottom of page